anigre veneer board

this was a board that i made a couple of years ago, its a veneer of an african wood called anigre ,really nice mottled wood ,it only 0.6mm thick so a sandwhich of glass either side keeps it durable , they come out about the same weight as a poly board but are a lot stronger,

the rails are balsa and trhe core is again 1lb eps, i like the veneer boards ,wood is good

the rear fin plug is a fin solution plug ,it takes fcs,fin solution fins or in this case i cut down a futres hatchet fin to use as a rear fin ,

its 6ft 5ins x 20 1/4

new carbon railed board 6ft 1 1/2 x 18 3/4

i thought i would build another carbon railed board again this tine 6ft 1 1/2 x 18 3/4 x 2 1/2 ,same 3mm pu hd foam over a 1 lb eps core , they are a bit more flexable than the all balsa boards but not as light ,still about the same as a pu board but a lot stronger